Filter
Top Products
Noncontact Food Safety Thermometer
Setting/Changing ºC and ºF Temperature Scales
17
Note
Each time the battery is installed or replaced, the temperature
scale will default to the Celsius scale. To select the Fahrenheit
scale see ‘Setting/Changing
°
C and
°
F Temperature Scales’.
Troubleshooting
Code: --- (on display)
Problem: Target temperature is over or under range
Action: Select target within range specifications
Code: Battery Symbol
Problem: Possible low battery
Action: Check and/or replace battery
Code: Blank display
Problem: Dead battery or unit failure
Action: Check and/or replace battery. If the battery is OK, then
contact a Fluke service center for repair.
Other Operational Considerations
All models are protected from the following:
• EMI (Electro Magnetic Interference) from induction heaters and
microwave ovens
• Electrostatic discharge
• Should the unit become damaged, check the accuracy of the unit by
performing the verification process recommended in this manual. If the
unit is out of calibration, do not rely on it for critical temperature
measurements. Contact a Fluke service center for repair,
• Heat from stovetops, pans, or other hot surfaces (don’t set it on the
stove)