Filter
Top Products
Symbol Description
Canadian Standards Association
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per
IEC1010-1 refers to the level of Impulse Withstand Voltage protection
provided. Equipment of OVERVOLTAGE CATEGORY II is energy-con
-
suming equipment to be supplied from the fixed installation. Exam
-
ples include household, office, and laboratory appliances.
C-TICAustralianEMCMark
The European Waste Electrical and Electronic Equipment (WEEE) Di
-
rective (2002/96/EC) mark.
1.2 Safety Information
Use this instrument only as specified in this manual. Otherwise, the protec-
tion provided by the instrument may be impaired.
The following definitions apply to the terms “Warning” and “Caution”.
“Warning” identifies conditions and actions that may pose hazards to the
user.
“Caution” identifies conditions and actions that may damage the instrument
being used.
1.2.1
Warnings
To avoid personal injury, follow these guidelines.
•
DO NOT use this instrument to measure the temperature of any haz
-
ardous live component.
•
DO NOT use this unit for any application other than calibration work.
•
DO NOT use this unit in environments other than those listed in the
user’s manual.
•
Use of this instrument at high temperatures for extended periods of
time can cause the handle to become hot.
•
Follow all safety guidelines listed in the user’s manual.
•
Calibration Equipment should only be used by Trained Personnel.
1.2.2
Cautions
To avoid possible damage to the instrument, follow these guidelines.
•
DO NOT remove the label from the handle. This cautions the user con
-
cerning the delicate nature of the instrument.
5626/5628
User’s Guide
2
CAT