Filter
Top Products
3.2 Construction
The Model 5626 and 5628 PRTs cover the range from –200°C to 661°C. The
sensor elements are crafted using high purity platinum wire wound in a
strain free design on a specially designed support.
3.3 Electrical Circuit
The PRTs are provided with a terminal box handle. The two meter cable has
four Super-Flex wires enclosed in a PVC jacket with a stainless steel spring
strain relief. Gold plated spade lugs terminate the wires.
3.4 Warranty
Hart Scientific, Inc. (Hart) warrants this product to be free from defects in
material and workmanship under normal use and service for a period as
stated in our current product catalog from the date of shipment. This war
-
ranty extends only to the original purchaser and shall not apply to any
product which, in Hart’s sole opinion, has been subject to misuse, alteration,
abuse or abnormal conditions of operation or handling.
Software is warranted to operate in accordance with its programmed in-
structions on appropriate Hart products. It is not warranted to be error free.
Hart’s obligation under this warranty is limited to repair or replacement of a
product which is returned to Hart within the warranty period and is deter-
mined, upon examination by Hart, to be defective. If Hart determines that
the defect or malfunction has been caused by misuse, alteration, abuse or
abnormal conditions or operation or handling, Hart will repair the product
and bill the purchaser for the reasonable cost of repair.
To exercise this warranty, the purchaser must forward the product after call
-
ing or writing an Authorized Hart Scientific Service Center (see Section 1.3
on page 3) for authorization. The Service Center assumes NO risk for
in-transit damage.
THE FOREGOING WARRANTY IS PURCHASER’S SOLE AND EXCLUSIVE REM
-
EDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR MERCHANT
-
ABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE. HART SHALL
NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSE
-
QUENTIAL DAMAGES OR LOSS WHETHER IN CONTRACT, TORT, OR
OTHERWISE.
8
5626/5628
User’s Guide