Filter
Top Products
• Place the base upside down on a flat surface.
• “Snap” the front wheels to the underside of the base,
as shown.
Assembly
Bottom View
• Fit the peg on the left side of the hood into the matching
hole in the dashboard.
• Press to “snap” the other peg into the dashboard.
Front Wheels
•
Insert and “snap” the caster wheels into the base, as shown.
Hint: This may require some force.
• Pull up on the caster wheels to be sure they are secure to
the base.Turn the base over.
Caster Wheels
• Insert and “snap” the dashboard into the base, as shown.
Hint: This may require some force.
•
Pull up on the dashboard to be sure it is secure to the base.
Dashboard
Hood
3
1
2
3
4