Filter
Top Products
A - 6
ThermoSmart
®
Climate setting*
To change the delivered temperature: Press for warmer more humid air
delivery. Press for cooler and drier air delivery.* Refer to Section 5.4
Altitude
Select “m” for metres or “ft” for feet using and keys.
Altitude setting
- Set the altitude level by pressing and keys
- Press to exit menu
Actual Pressure (Displays actual pressure)
- Display reverts to default if the menu is not exited. Press button in order to
exit menu (only available in HC602).
8. ConTrols anD Display
Mode button
Step through the options
Down button
Decrease Setting
Up button
Increase Setting
Ramp button
On/Off button
8.1 Display Description and Functions
KEY FUNCTION & DESCRIPTION OPERATION
TO SWITCH “ON”
Press button down briefly.
The device will default to display the ThermoSmart
®
Humidity setting.
TO SWITCH “OFF”
Remove your mask
Press button briefly
TO SWITCH “ON”
Press
(NB: to reset ramp during a cycle the device must be switched off first)
TO SWITCH “OFF”
Press
Press and button to raise or lower settings.
Press sequentially to step through and view options available.
<
<
PATIENT MENU DISPLAY OPERATION
For viewing CPAP settings, humidity,
compliance data, altitude and pressure
settings
TO VIEW ITEMS
Press key to sequentially view:
ThermoSmart
®
Humidity setting (default display)
For adjusting ThermoSmart
®
Humidity setting levels to minimize upper airway
side effects from CPAP use.
Press and button to raise or lower settings
Total run hours: displays the total number of hours the device has been
switched on (includes hours without mask use)
Average compliance hours per night: displays average number of hours
the device has been used at night with the mask on.
Check sum: displays information for the medical practitioner or the dealer to
check compliance.
Altitude setting: displays altitude setting. Press or to change altitude.
Pressure setting: displays pressure setting.
cmH
2
O
hr
hr/
ON/OFF
Switches the device ON and OFF
RAMP
Reduces pressure to a lower level
to help you fall asleep. The pressure
will gradually return to full operating
pressure over 20 minutes.
INCREASE/DECREASE
Adjusts settings up or down
MODE
To step through options.
PATIENT MENU - Additional Settings DISPLAY OPERATION
To access additional settings:
From the Default setting
"THERMOSMART
®
HUMIDITY"
Press the key for 3 seconds
3000
cmH
2
O
Warning: Failure to select correct altitude setting (for any given location) will have an adverse effect on delivered pressure.
* When the ThermoSmart
®
Climate setting is altered the Humidity Setting will revert back to default setting 2.5