Filter
Top Products
EXCELL PRECISION CO., LTD.
Weighing ZSME300000036
9
(6). Low Voltage Auto Power off Function
Œ When the voltage of batteries is lower than 5.6v±0.1 v, it turns off backlight and
the screen displays the battery symbol to intimate it needs to be recharged.
• When the voltage of batteries is lower than 5.4v±0.1 v, it would auto power off;
meanwhile, if turning on again, the screen would not be countdown and only
displays the battery symbol. It would auto power off after 5 seconds, and it
needs to recharge immediately.
Ž When the voltage of batteries is lower than 5.2v±0.1 v, it can’t be turned on and
please recharge immediately.
(7). Tare Function
1. Weight of Unknown Container ( TARE/← )
Œ Place the container on platter. After being stable, press TARE/← key to
re-zero. The screen will display net weight (Net) indication.
• Place the object into the container, and the scale will display the net weight of it.
Ž “Tare value” clearing
Remove both the container and the object on the platter; the scale displays the
negative value of the container. Meanwhile, press TARE/← again to clear
“tare value,” and the net weight (Net) indication disappears.
• “Tare value” recall
Press RECALL and then TARE/← ⇒ The screen displays “tare value”.
4 Capable of continuously taring until the summation of tare and pre-tare value
equals the capacity of the scale.
4 Continuously tare function ⇒ both continuously increasing or decreasing
weight on platter are acceptable by pressing TARE/← key.