Filter
Top Products
EXCELL PRECISION CO., LTD.
Dolphin 9903 V 1.1 SME300000041
17
Use the
ON/ZERO
or
UNITS
key to input a parameter
1-6 Hold Function Setting
ON/ZERO ⇒ Upward digit selecting (0-9)
UNITS ⇒ Downward digit selecting (9-0)
TARE ⇒ Move the cursor rightward
NET/GROSS ⇒ Move the cursor leftward
Press the
TARE
key
Hold function setting
Default setting = 0
0 ⇒ No hold function
1 ⇒ “peak” hold function mode
2 ⇒ “stable” hold function mode 1
3 ⇒ “stable” hold function mode 2
The
display shows the current hold
function mode
Press the
TARE
key
Press the
TARE
key to
complete the function setting
Input “00”
⇒ No Hold function
⇒ “Peak” hold function mode
When the weight keeps changing, the scale will automatically hold
and display the largest value.
Press any key to clear the held value.
⇒ “Stable” hold function mode 1
When the scale becomes stable, the display shows and holds the
weight value, which can not be changed.
Press any key to clear the held value.
⇒ “Stable” hold function 2
When the scale becomes stable, the display shows and holds the
weight value, which can not be changed.
When the scale is re-zeroed (weight less than 10d), the held value is
automatically cleared.