Filter
Top Products
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 3: Electrical installation
3-9000-759 Rev D June 2014
Analog output settings 63
3.6.3 Analog output settings
The Daniel 3410 Series Ultrasonic Gas Flow Meter provides two 4-20 mA analog output signals
that are software configurable for either sink or source current (see Appendix A DMC - 005324).
Full HART® functionality is provided so that any commercially available HART® transmitter
which meets the specifications of the HART® Communications Foundation can be connected to
the Daniel® Liquid Ultrasonic Flow Meter.
• Analog Output1 (AO1) is user-configurable as a 4-20mA output and has HART
capabilities.
• Analog Output 2 (AO2) is user-configurable as a conventional 4-20 mA output.
3.6.4 Digital Input
The Daniel 3410 Series Gas Ultrasonic Flow Meter provides one digital input that can be used as
a general purpose input. The digital input must be configured via the Daniel MeterLink
Tools|Edit/Compare Configuration screen.
3.6.5 DHCP server switch settings
The meter can be configured to act as a DHCP server. The DHCP server is enabled/disabled via
CPU Module DHCP switch as follows:
Table 3-6 DHCP server switch settings
CPU Module switch
DHCP server
disabled
DHCP server
enabled
OFF ON
DHCP
Switch 2