E&J IC4 Wheelchair User Manual


 
02002178 Revision B, March 2006 • Metro IC4 Owner’s Manual 25
REASSEMBLY
1. Push down with even pressure on seat tubes on both sides.
WARNING: Do not place your hand between seat tube and
side panel.
2. Push again if seat tubes are not positioned directly upon front
frame seat struts as shown below.
locked
correct position
right front
seat tube
seat strut
not locked
unsafe to occupy
in this position
right front
seat tube
seat strut
3. Attach footrests or legrests to wheelchair.
4. Reinstall the seat cushion, if so equipped.
WARNING: When reassembling the wheelchair, ensure that
both seat tubes are locked in place on seat
struts on front of frame. If not, wheelchair is
unsafe to occupy.
WARNING: Ensure that footrests or legrests are locked in
place before occupying or operating wheelchair.