E&J EJ777-2 Wheelchair User Manual


  Open as PDF
of 28
 
16 EJ777-2-INS-LAB-RevB14 • EJ777-2 Transport Chair
attendantwheellock,
unlocked
attendantwheellock,
temporarilylocked
lowergrip
pushhandle
attendantwheellock,
unlocked
attendantwheellock,
indefinitelylocked
lowergrip
pushhandle
ATTENDANT WHEEL LOCKS
WARNING: Wheel locks are not brakes. Do not use the wheel locks to slow down
the Transport Chair, or while the Transport Chair is moving. Wheel locks are only
intended to keep the Transport Chair in place when it is at a complete stop.
For attendant: attendant wheel locks, temporary lock
The attendant wheel locks can be engaged temporarily:
1. To engage attendant wheel
locks, squeeze the lower grip
upward toward the push
handle as shown at far right;
the rear wheels will be locked
in place as long as you hold
the lower grip as shown at far
right.
2. To release attendant wheel
locks, let go of the lower grip;
the rear wheels will be free to
move.
For attendant: attendant wheel locks, indefinite lock
(for transfer or stationary periods)
1. To engage attendant wheel
locks indenitely, push the
lower grip down, away from
the push handle, until it locks
into place, as shown at far
right. The rear wheels will be
locked in place.
2. To release attendant wheel
locks, pull the lower grip
upward toward the push
handle until the rear wheels
move freely.
WARNING: Ensure that wheel locks lock in place appropriately before occupying or
operating Transport Chair. If your wheel locks are not operating correctly, please see
your Graham-Field authorized distributor for repair.
 previous next