Filter
Top Products
16 3J01-INS-LAB-RevB13•TravelerHTCUserManual
InstallElevatingLegrests(orOptionalFootrests)
M13 wrench
WARNING: The footplates' lowest point should be no closer to
the ground than 2
1
/2 inches, to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the
wheelchair to tip.
1. Set legrest on wheelchair
frame (so that legrest
hinge plates engage
hinge pin bolts).
2. Swing legrest inward.
3. Attach anti-theft nuts.
4. Use an M13 wrench to
tighten.
5. Ensure legrests are
locked in place and
swingaway release levers
are locked in a rearward
position, toward back of
wheelchair.
WARNING: Ensure that front rigging is locked in place before
occupying or operating wheelchair.
nut
hinge
plate
swingaway
release lever
install elevating legrest /
optional footrest