Filter
Top Products
14 3J01-INS-LAB-RevB13•TravelerHTCUserManual
InstallPushHandle/Anti-FoldBar
M10 wrench, M4 hex key
1. Slide the push handle / anti-
fold bar over both back posts
as shown at right.
2. Install the nuts and bolts
that secure the push handle /
anti-fold bar on both sides as
shown at right. Use an M10
wrench and M4 hex key to
tighten.
InstallAnti-Tippers
M13 wrench, M5 hex key
1. Slide the anti-tipper tube,
wheels downward, into the
frame bottom rail, as shown
at lower right.
2. Install bolt through top frame
rail hole, anti-tipper, and
bottom hole as shown. Install
nut on bolt. Use an M13
wrench and M5 hex key to
tighten.
3. Repeat steps 1 and 2 for
other anti-tipper.
WARNING: Anti-tippers
must be installed in the downward position.
secure push handle /
anti-fold bar
install push handle /
anti-fold bar
push handle /
anti-fold bar
push handle /
anti-fold bar
back post
bolt
nut
install anti-tipper
bottom
rail
bolt
nut
anti-tipper