Filter
Top Products
7
ARMREST
The height adjustable T-type armrest (Fig. 11) is provided as standard equipment on
your wheelchairs. Adjustment for the wheelchair is facilitated by a lock pin inserted
from the outside of the armrest support at the lower extremity and the top of the
armrest post. To activate the ball lock pin simply depress the lever found beside the
support tube and remove it from the locating hole.
The controller unit can easily be adjusted to different positions in order to meet user's
demand. To adjust it, (Fig. 12) loosen the knob and move the mounting tube to the
desired position then tighten the screws.The armrests can be unlocked and pivoted to
the rear of the chair frame to assist in patient transfers.
The width of the arms can be narrowed or widened by loosening the hand
screw and the base of the arm.
Button
Adjusting Knob
Fig. 11
Fig. 12