Filter
Top Products
DP
INSTALLING THE FUEL LINES
Step Five
Page5
Installing The Stand Pipe
1. Locate hole in an area where the fuel pickup is kept safe (the center of the tank is recommended).
2. Tighten hose clamps.
3. Secure the fuel lines to reduce movement.
Gas Tank
Back View Of APU
12” Min Between
Supply And Return
Allow 1” To 2” Min.
Space To Bottom Of Tank
Return 3/16” ID
Supply 5/16” ID
No Kinks Or
Abrasion Points
Drill 1” Hole Using Unibit or Hole Saw
Tighten Until
Secure
Nut
Washer
Gasket
Tank
Flange
Cut Tube
Bottom 45°
WARNING: Exercise safety measures when working
near flammable fuel.
CAUTION: Keep fuel lines safe from wear points.
CAUTION: Keep fuel lines away from exhaust pipes and heated moving parts.
CAUTION: The standpipe must enter the tank from the top and not the side.
Fuel Line