English
Español
Português
Deutch Français
- Eng 7 -
4. TURN ON THE POWER
a. Make sure water reservoir and medication cup are
properly filled, and the unit is placed on a flat and dry
surface.
b. Turn the switch at bottom of unit to “ON” position.
The LED indicator should be lit.
c. Press the On/Off button once. The unit will start work-
ing with “high” nebulization rate. The corresponding
“nebulization rate indication lamp” will illuminate.
5. ADJUST NEBULIZATION RATE &
BEGIN TREATMENT
a. Press the “nebulization rate control button” to adjust
the nebulization rate at high, medium or low speed,
which will be illuminated by corresponding indication
lamp.
b. Begin treatment according to your physician's instruc-
tions.
Caution:
Stop operation immediately if any abnormality is
noted.
6. FINISH OPERATION
a. Press the On/Off button to stop operation.
b. Turn the switch at bottom to “OFF/CHARGE” position.
c. Unplug the adapter from AC outlet first and then from
unit's receptacle.
Note:
1. Stop operation when the medication is finished.
2. Operation will stop automatically after 10-minute
continuous use.
3. To reuse, wait for approx. 10 minutes for the unit
to cool down.
4. The switch at bottom must be turned to "OFF/
CHARGE" position to save battery power and avoid
unwanted operation against accidental press of the
on/off button.