Citizen CT810 Thermometer User Manual


 
7
ENGLISH
- Do not store the ear thermometer where it will be exposed to moisture,
direct sunlight, high temperature or high humidity, or excessive dust.
CLEANING
Do NOT store the ear thermometer soiled or moist. If the ear
thermometer is soiled, take the following steps to clean it.
1. Use a soft sponge soaked in neutral detergent to lightly wipe dirt off
the probe and probe window.
2. Rinse the ear thermometer in standing lukewarm water for less than
20 seconds to remove dirt and detergent.
3. Be sure to carefully dry the ear thermometer with a soft cloth.
- Avoid using the ear thermometer for measurement immediately after
washing. Wait at least 5 minutes before use.
- Do NOT rinse the ear thermometer directly under strong water flow
from a faucet.
- Do NOT use a toothbrush, scouring sponge or pad, steel wool,
cleanser, etc. to clean this instrument.
DESCRIPTION OF DISPLAY MARK
Error 1
This message will be displayed if the thermometer fails to make
stable measurement of body temperature within 30 seconds.
Insert the probe into the ear promptly after pressing the switch.
Error 2
This message will be displayed if the switch is pressed
with the thermometer in the ear. Be sure to press the
switch and confirm that “Fig. 7 ( )” is displayed, then
insert the probe into the ear for measurement.
Error 3
This message will be displayed if the temperature
measured is above 42 ˚C. The thermometer may have
measured the temperature of a nearby heat source. Avoid
external heat sources and try again.
Error 4 This message will be displayed if the ambient temperature
is out of the measurement range (below 5 ˚C or above
40 ˚C). Move to a place within the proper temperature
range (from 5 to 40 ˚C) end let the thermometer stand for
at least 10 minutes before measuring again.