Filter
Top Products
5
ENGLISH
5. The measurement time is approximately 2 seconds. A short, double
beep tells you that measurement is completed. The measurement
result will flash on the display if the ambient (room) temperature is
35 ˚C or higher which means the measurement is not completed. In
such a case, take the following steps to measure again.
6. Press the switch, and turn the power off.
If the ambient temperature is 35 ˚C or higher:
To prevent the ear thermometer from measuring the ambient
temperature, make sure that the power is turned off, then hold the switch
pressed for at least 3 seconds. Still holding the switch pressed, insert the
probe into the ear, then release the switch.
1. Small children must not operate this instrument, and it must be kept
out of their reach. Be sure that body temperature is measured by
an adult.
2. The person whose temperature is to be taken must not move
his/her head while the probe is being inserted into the ear.
3. Once a measurement is taken, the temperature in the ear is
affected. Therefore, wait at least 1 minute before taking next
measurement.
AUTO POWER OFF FUNCTION
If this unit is left on after measurement, an Automatic Power-OFF
Function turns the power OFF after approximately 1 minutes.
Caution