Filter
Top Products
- Eng 14 -
Deutsch
English
Español
Português
Italiano
Français
- Eng 15 -
English
Español
Português
DeutschItaliano
Français
HOW TO WRAP THE WRIST CUFF
Wrap the wrist cuff around your wrist properly. Improper wrapping of
the cuff may result in measuring errors.
1 Open the wrist cuff.
2 Wrap the cuff around your left wrist
so that the monitor is positioned on
the inside of your wrist.
• Wrap the wrist cuff on bare skin.
• The wrist cuff is designed to fi t
wrists from 13.5 to 21.5 cm in
circumference.
3 Loosely fi t the wrist cuff by
pulling the end of the cuff.
HOW TO WRAP THE WRIST CUFF
4 Position the top edge of the cuff
approximately 1 to 2 cm away from
the crease of your wrist.
5 Secure the wrist cuff with the hook-
and-loop fastener.
• If the wrist cuff is wrapped
too loose or tight, errors or
incorrect readings may result.
You may use your right wrist to measure your blood pressure.
However, your blood pressure may differ by about 10mmHg depending
on whether measured on your left or your right wrist, so ideally you
should measure your blood pressure on the same wrist each time.
To obtain accurate measurements
• Wrapping the cuff too loosely or too tightly may prevent correct
measurement.
• Sit up straight while taking the measurement.