Filter
Top Products
E. To change batteries:
When " " show up on the display, the battery is weak.
Change the batteries or it will not be possible to take blood
pressure measurement. All batteries used must be the same
type. Do not mix alkaline, standard(carbon-zinc) or rechargeable
(cadmium) batteries. Do not mix old and new batteries.
b. Recalling data:
(1). Press " M " button.If there is no data in the memory,
only TIME/DATE and USER symbol will appear on the
display. If yes, the ¿rst reading will be the average of
the latest 3 measurements. (The average value dose
not appear if there are two or fewer measurements
stored in memory.)
(2).
Press " M " button again, the latest measurement will
appear with the number as well as the recording date
and time. The data called up on the display is numbered
accordingly. After reading the recalled data as rotator 60-set
of the stored data, press " M " to switch to normal time.
(3). To discontinue in the midst of reading of the data,
press " " button.
(4).You can select USER memory ( ) by
pressing " " button.
c. Erasing data:
(1). Press " M " button and press " " to select USER
( ).
(2). Press hold " " and " " button to clear memories.
" CLA " show up on the display for 3 seconds.
14
1
2
1
2
STO
P
ST
AR
T