Filter
Top Products
English
- Eng 23 -
The cuff pressure will be set the pressure value you
decided when you stop pressing the
, and the
monitor will start measuring your blood pressure.
• The starting pressure can be set between 160 and
280 mmHg manually.
• If the level of the pressure is not enough, the
pressure is automatically heightened to the level for
measurement of the blood pressure again.
* If you stop pushing the
while the pressure is
less than 160 mmHg, the pressure will be set to 160
mmHg, automatically.
A little while after the cuff is at the correct pressure,
the
mark will be lit and the measurement will start
automatically.
When your pulse is detected, the
mark will blink
and a pressure reading will appear in the diastolic blood
pressure readout.
After the measurement is taken and recorded, the
air inside the arm cuff will be released and the
measurement results (Systolic/Diastolic blood pressure
and pulse rate) will appear.
• When the measurement is complete, the results
will be stored in the memory in the monitor unit,
automatically.
HOW TO MEASURE YOUR BLOOD PRESSURE