Filter
Top Products
- Eng 17 -
HOW TO MEASURE YOUR BLOOD PRESSURE
English
4.3 Press the exhaust button
Press the exhaust button valve to completely
release the air in the cuff.
4.4 Power off
Press the "POWER" switch to turn off.
4.5 Subsequent measurement
For another measurement, just pressurize
the cuff by pumping bulb.
The time between two such Measurements
must be at least 3 minutes.
- Eng 16 -
HOW TO MEASURE YOUR BLOOD PRESSURE
4.2 Pressurize the cuff
Pressurize the cuff by pumping bulb until you
have a reading of approximately 30 to 40
mmHg higher than your regular systolic
blood pressure.
When pressurization is completed, the
automatic air release system will gradually
reduce cuff pressure, and Measuring Mark
" " will appear on the display indication
that measurement is in progress.
(
*
Do not pump bulb while measuring.)
When a pulse is detected, a pressure
reading will shift to the diastolic pressure
display section. Once the pulse is detected,
the " " mark will flash with each pulse
beat.
When the diastolic pressure value is
detected, the measurement is completed.
After completion of measurement, the mark
"▼" appears.
Exhaust button
Automatic Power off Function
About 3 minutes after the last measurement was obtained, the power will be
turned off, automatically.