Citizen CH-311B Blood Pressure Monitor User Manual


 
- Eng 15 -
HOW TO MEASURE YOUR BLOOD PRESSURE
English
After all display marks are disappeared, the
last measured systolic / diastolic blood
pressure values and pulse rate are displayed.
Memory function works on for approximately
2 second or during depressed the "POWER"
switch.
After memorized blood pressure value is
disappeared, deflation mark "" appears.
If there is some air remaining in the cuff,
release air with the exhaust button until the
"0" appears.
The unit is now ready to take new
measurement.
- Eng 14 -
HOW TO MEASURE YOUR BLOOD PRESSURE
1 Wrap the arm cuff tightly around your arm.
( See page 12 "HOW TO WRAP THE ARM CUFF".)
Air Hose
socket
2 Insert the air hose plug into
the case of the unit (Air Hose
socket).
3 Sit in the recommended
position.
( See page 11 "POINTS FOR
ACCURATE MEASUREMENTS".)
4 Measure your blood pressure.
4.1 Turn the Power On
Grip the pumping bulb.
(
*
Do not bend or pull the pumping
bulb.)
Press the "POWER" switch for Power
on.
All display mark appear for approx. 1
second.