Filter
Top Products
3-9
Cisco AVS 3180 Management Station Hardware Installation Guide
78-17292-01
Chapter 3 Installing the AVS 3180
Installing Your AVS 3180
Inserting the AVS 3180 into the Rack
To insert the AVS 3180 into the four-post rack, follow these steps:
1. Secure the inner rail (1) to the AVS 3180 using three round head screws (2), as shown in Figure 3-7.
Repeat this step for the other rail.
Figure 3-7 Attaching the AVS 3180 to Right Rail
2. Insert the AVS 3180 and inner rail into the two outer telescopic rails, as shown in Figure 3-8.
Figure 3-8 Sliding the AVS 3180 into the Four-post Rack
3.
Slide the AVS 3180 and inner rails backward and forward in the two outer telescopic rail two or three
times until the AVS 3180 seats properly in the rack.
Attaching a Two-Post Rack Bracket to the AVS 3180
You may install the AVS 3180 in either a four-post rack or a two-post rack by using the two-post rack
bracket that is included in the accessory kit.
To attach a two-post rack bracket to the AVS 3180, follow these steps:
1. Place the right-hand bracket on the right side of the AVS 3180, as shown in Figure 3-9. Align the
bracket with the three screw holes in the AVS 3180, and use three round head screws to secure the
bracket.
Repeat this step to attach the other bracket to the AVS 3180.
1
2
143778
0
1
i
143779
0
1
i