Filter
Top Products
Page 6SKU 97448 For technical questions, please call 1-800-444-3353.
Figure F
Bulb
Support
Latch
Bulb
Glass Frame
8. Fasten the Bulb Support Latch back
into place. See Figure F, above.
Slide the Bulb into place against the 9.
Glass Frame.
Slide the Lens and Lens Frame back 10.
underneath the Glass Frame so that
the Bulb ts into the Lens Frame and
the Screws align with holes along the
Lens Frame.
Fasten the Glass Cover to the 11.
Lens Frame using the ve removed
screws. Do not overtighten.
Once all connections are secure, set 12.
the Magnifying Lamp upright and on
its base and tighten the adjusting
knobs.
INSPECTION AND
MAINTENANCE
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION OR ELECTRIC
SHOCK:
Before appliance inspection
or maintenance, make sure
the Power Switch (12) is
turned off, the cord is
unplugged, and the bulb has
cooled.
TO PREVENT SERIOUS
INJURY FROM APPLIANCE
FAILURE:
Do not use damaged Lamp.
Have the problem corrected
before further use.
BEFORE EACH USE,1. inspect the
general condition of the Magnifying
Lamp. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
Regularly wipe off lamp with a soft 2.
and moist cloth to prevent dust accu-
mulation.
WARNING