Filter
Top Products
Page 4SKU 97448 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 120 V~ / 60 Hz
Material
ABS plastic frame
Glass lens
Magnication 3 D + 12 D
Bulb Type
4T 12W Energy Saving
Compact Fluorescent Lamp
Cord Length 4’ - 9”
Height 20”
Base Dimensions 8-5/16” L x 4-1/4” W
E224011
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
OPERATION
Read the ENTIRE IMPORTANT
SAFEGUARDS section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this Lamp.
Plug the power cord into the nearest 1.
two or three prong outlet.
Figure A
Power
Switch
2. Turn on the Lamp by pushing down
on the black Power Switch (12) found
at the back of the Lamp’s base. See
Figure A, above.
Figure B
Lens
Cover
Lens
Lens
Frame
Adjusting
Knob
3. To use the Lamp’s magnication set-
tings, pull open the Lens Cover (3)
from the Lens Frame (2). See Figure
B, above.
Use the Adjusting Knob (9) to reach 4.
the desired angle.
After each use, shut the Lens Cover 5.
(3) and remove the Power Cord (13)
from the outlet.