Filter
Top Products
Page 6SKU 66384 For technical questions, please call 1-800-444-3353.
Fig. 6.)
Lens Frame (34)
Circline Bulb (46)
Bulb
Socket (44)
8. Fasten the Bulb Support Latch back
into place. (See Fig. 6.)
Lower the Bulb into place in the Lens 9.
Frame (34).
Re-attach the three Bulb Clips (47) 10.
and screws securing the Bulb back in
the Lens Frame.
Place the Clear Cover (45) back onto 11.
the Lens Frame and align the screw
holes.
Fasten the Clear Cover back onto 12.
the Lens Frame using the ve screws
removed earlier. Do not overtighten.
Once all connections are secure, set 13.
the Magnifying Lamp upright and on
its base. Adjust the tilt/angle of the
Lamp head and tighten the adjusting
knob.
INSPECTION AND
MAINTENANCE
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION OR ELECTRIC
SHOCK:
Before appliance inspection
or maintenance, make sure
the Power Switch (12) is
turned off, the cord is
unplugged, and the bulb has
cooled.
TO PREVENT SERIOUS
INJURY FROM APPLIANCE
FAILURE:
Do not use damaged Lamp.
Have the problem corrected
before further use.
BEFORE EACH USE,1. inspect the
general condition of the Magnifying
Lamp. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
Wipe off lamp with a soft, moist cloth 2.
regularly to prevent dust accumula-
tion.
WARNING
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL
RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.