Filter
Top Products
Page 5SKU 66384 For technical questions, please call 1-800-444-3353.
REPLACING THE BULB
When replacing the Lamp Bulb
(46), be sure to wear ANSI-
approved safety goggles. Also,
keep track of the eight Screws
(48) during replacement. The
Screws are very small and can
be swallowed by young
children.
To replace the 22W Circuline Bulb 1.
(46), turn off the Lamp and unplug
the Power Cord (12) from the outlet.
Lay the Lamp down and loosen the 2.
Adjusting Knob (31) so that the Lamp
rests at on the work surface with the
Bulb facing up.
Fig. 3 / Lamp Head Assembly
Screws
Screws
Clear
Cover (45)
3. Use a #1 Phillips screwdriver (not
included) to remove the ve Screws
(48) from the Clear Cover (45). (See
Fig. 3.)
Lift the Clear Cover (45) away from 4.
the Lens Frame (34). Please note:
The Bulb Clips also hold the 5" Lens
in place, so when removed, the Lens
is loose and could fall out if the lamp
head is turned over.
Fig. 4
22W Circline
Bulb (46)
Bulb Clip (47)
5. Remove the Bulb Clips (47) by un-
screwing the screws holding the clips
with a #1 Phillips screwdriver. (See
Fig. 4.)
Fig. 5
Bulb (46)
Bulb Prongs
Bulb Socket (44)
6. Pull the Circline Bulb (46) prongs out
of the square Bulb Socket (44). (See
Fig. 5.)
Dispose of old Bulb properly and 7.
install a new 22W Circline Bulb
by aligning the Bulb Prongs to the
Lamp Socket openings and push the
prongs securely into the socket.