Chauvet RX Pacemaker User Manual


 
EN D-Fi Duo 2.4 QRG
3
Operation
Clear the previous frequency setting from all CHAVUET® D-1.
Fi™ 2.4 GHz receivers.
On the D-Fi RX™ 2.4/ D-Fi TX™ 2.4, press the AUTO 2.
button for 15 seconds or until transmiting product(s)’ signal
LED blinks rapidly.
Note:
Receiver(s) should be 3~10 ft (1~3 m) away from the
transmitter during sync.
AC Power
Both products have an external auto-ranging power supply that can
work with an input voltage of 100~240 VAC, 50/60 Hz.
Product Overview
Power Input
DMX Input
AUTO Button
Signal LED
Antenna
Mounting Hole
D-Fi RX™/TX
(Top View)