Chauvet RX Pacemaker User Manual


 
D-Fi Duo 2.4 QRG EN
2
About
This Guide
The D-Fi Duo 2.4 Quick Reference Guide (QRG) has connection
information.
Disclaimer
The information and specifications here are subject to change without
notice. CHAUVET® reserves to right to revise or reissue this QRG.
Safety Notes
These Safety Notes include important information about mounting,
use, and maintenance.
This product is not intended for permanent installation.
Always connect this product to a grounded circuit to avoid the risk
of electrocution.
Make sure the power cord is not crimped or damaged.
Never disconnect this product from power by pulling on the cord.
The voltage of the outlet you are connecting this product to must
be within the range stated on the decal or rear panel of the product.
This product is for indoor use only! (IP20) To prevent risk of fire
or shock, do not expose this product to rain or moisture.
Never connect this product to a dimmer.
The maximum ambient temperature is 104° F (40° C). Do not
operate this product at higher temperatures.
In the event of a serious operating problem, stop using
immediately.
Never try to repair this product. Repairs performed by
unauthorized technicians can lead to damage or malfunction.
Contact the nearest authorized technical assistance center.
What Is
Included
D-Fi RX™ 2.4 & D-Fi TX™
2.4
Power Supply
Warranty Card
Quick Reference Guide
To Begin
Unpack your D-Fi Duo 2.4 system and make sure you have received
all parts in good condition. If the box or contents appear damaged,
notify the carrier immediately, not CHAUVET®.
Product
Description
The D-Fi RX™ 2.4 and D-Fi TX™ 2.4 are is wireless transmitters
with a range of up to 200 m (656 ft). The transmitters wirelessly pair
multiple D-Fi™ 2.4 Ghz-compatible product
s with one button and
supports one DMX-512 universe.
Contact
Outside the U.S., United Kingdom, or Ireland, contact your
distributor to request su
pport or return a product. Visit
www.chauvetlighting.com for contact information.