Filter
Top Products
utiful seams can be produced even at high speeds.
w
ide range of applications while saving energy.
As the work clamp operation is controlled by a pulse motor, the work
clamp lift amount can be set simply by entering a numeric value at the
operation panel without need of using tools. Furthermore, you can use
the user programs to set desired work clamp lift amount for each
program respectively. No need to adjust the amount at every change
of programs.
Work clamp lift amount can be set on operation panel (BAS-311G Motor-driven work clamp spec.)
Easy programmer* with large color LCD
Easy programming
Positioning pins
Simply by loosening the two screws, the work clamp
can be replaced quickly. It can also be installed
accurately by using the positioning pins.
Work clamp can be replaced quickly and accurately
Large-capacity memory capable of storing bulky data
When replacing the feed plate, stitch data can be easily
and accurately aligned with the feed plate by aligning the
reference holes of the needle plate and the feed plate.
Feed plate can be replaced accurately
• Programs can be easily created in the same procedure as the
programmer of the previous model.
• A shape of pattern data can be checked while it is created.
• Comments can be added to the program. Also, horizontal and
vertical sizes are displayed so that programs of similar figures
can be identified.
Changing sewing pattern is simple
Large-capacity memory (*512 programs, 500,000 stitches) is embedded
in the sewing machine so that a large quantity of data can be stored.
There is no need to read a program each time it has been changed.
A compact flash (CF) card has been adopted for handling a large amount
of data. Read and write speed is fast, which allows multiple data to be
copied or moved to other sewing machines or computers for data
management.
Sewing data can be managed with programmer
Sewing data management is easy because sewing data image can
be displayed and sewing data can be copied and moved easily.
*The number of patterns and stitches which can be stored depends on the number of stitches
for each program.
*optional product