Filter
Top Products
13
Using the rotating styler
The wide shaper (4a) evenly cuts and trims large areas (c). It
is ideal for shaping sideburns, moustaches and partial short
beards. The wide shaper is provided with safety rips and a
gliding strip for less irritation and easy gliding. Press the blue
stripes to push up the rotating styler (4).
While stretching the skin, guide the wide shaper against the
direction of hair growth.
The narrow shaper (4b) precisely defines lines and edges (d),
being ideal for precise contouring.
To use the narrow shaper, push up the styler and turn it 180°.
Frequent use of the styler will reduce the battery capacity.
Using the trimming attachment
The trimming attachment (7) is ideal for beard trimming
and keeping it at a constant length.
Place the trimming attachment onto the shaver foil (2) and
press it against the shaver housing until it snaps into place
with a click.
Press the beard length selector (8) (e) and slide it up in
order to set the desired beard length (length settings from
top to bottom 1.2 mm, 2.8 mm, 4.4 mm, 6 mm). Push up
the styler (4).
Activate the on/off switch and trim against hair growth by
guiding the transparent comb part over the skin.
Cleaning
Regular cleaning ensures better shaving performance.
Rinsing the shaving head after each shave under running
water is an easy and fast way to keep it clean:
Switch the shaver on (cordless) and rinse the shaving head
under hot running water (f). A natural based soap may also
be used provided it contains no particles or abrasive
substances. Rinse off all foam and let the shaver run for a
few more seconds.
Next, switch off the shaver, remove the shaver foil and the
cutter block. Then leave the disassembled shaving parts
to dry.
If you regularly clean the shaver under water, then once a
week apply a drop of light machine oil onto the long hair
trimmer and shaver foil (h).
•
•
•
•
•
•
•
99507069_Cruzer4_Z60_China 1399507069_Cruzer4_Z60_China 13 26.03.2010 13:34:14 Uhr26.03.2010 13:34:14 Uhr