Filter
Top Products
Lift Terminology
Page 4
between the lift platform and the
vehicle floor when the platform is
positioned at floor level.
Dual Handrails: Dual handrails
are provided for wheelchair
passenger use. The handrails
automatically unfold to the
deployed position when the
platform unfolds and fold auto-
matically to the stowed position
when the platform folds. The
passenger may choose to grip the
handrails when on the lift platform
(if applicable). Note: An addi-
tional UP/DOWN control switch is
built into the right (front) handrail.
Platform Assembly: The lift
“stacking” platform assembly is
made up of an inboard platform
section and an outboard platform
section (each section consisting
of a steel tubing frame with
grating surface). The outboard
platform section is equipped with
the outboard roll stop.
Automatic Roll Stop: The
spring loaded automatic roll stop
provides a ramp for wheelchair
loading and unloading at ground
level. Photos and further details
regarding the outboard roll stop
are provided in the Pre-Lift
Operation Notes and Details
section.
Manual Operation System: A
manual backup hand pump is
built into the pump module. The
lift platform can be unfolded,
lowered, raised and folded using
the hand pump. Manual Opera-
tion Instructions are provided on
pages 28-30.
and UP/DOWN). The switches
activate the automatic lift func-
tions and optional door operators.
Further details are provided in the
Pre-Lift Operation section (page
12).
Lift Frame: The lift frame
consists of the base plate, two
towers, the parallel arms, the
vertical arms, platform pivot arms
and the handrails. The two main
hydraulic cylinders are housed in
the parallel arms. The electrical/
hydraulic powered lift frame
components mechanically unfold,
lower, raise and fold the lift
platform assembly.
Bridge Plate: The hinged bridge
plate assembly bridges the gap
Lift Components (continued)