Filter
Top Products
Pre-Lift Operation Notes and Details
Page 17
Switches section). Discontinue
lift operation immediately if the
handrails do not operate
properly.
Lift Passengers
Do not attempt to load or unload
a passenger in a wheelchair or
other apparatus that does not fit
on the platform area. Do not
exceed the 800 pound load
capacity of the lift.
Passenger Orientation (Board-
ing Direction): The wheelchair
passenger must face outward
whenever on the platform.
The passenger must be posi-
tioned in the center of the
platform to prevent side-to-side
load imbalance. Other persons
should not ride on the platform
with the wheelchair passenger.
The wheelchair brakes must be
locked and the roll stop must be
in the fully-up (vertical) position
whenever a wheelchair passen-
ger is on the platform.
Do not use the outboard roll stop
as a barrier (brake). Stop and
brake the wheelchair when fully
loaded on the platform. Manually
stop and brake manual wheel-
chairs. Stop powered wheelchairs
with the wheelchair controls. Turn
powered (electric) wheelchairs off
when on the platform.
Vehicle (Floor Level) Loading
and Unloading: The platform
must be fully raised (at floor
level) and the bridge plate must
be properly positioned when
loading or unloading a passenger
in or out of the vehicle. Although
the VL955 features automatic
floor level switching, it is the
responsibility of the lift opera-
tor to ensure the platform and
the bridge plate are properly
positioned at floor level when
loading and unloading passen-
gers.
If the roll stop, bridge plate,
handrails or any other lift compo-
nent does not operate as outlined
in this manual, discontinue lift
use immediately and contact
your sales representative or call
The Braun Corporation at 1-800-
THE LIFT. One of our national
Product Support representatives
will direct you to an authorized
service technician who will
inspect your lift.