Filter
Top Products
12
Using the OxyJet
®
irrigator
Before using for the first time, fill the water container and
allow the water to run through completely by holding the
irrigator handle over a washbasin.
1. Attach one of the irrigator jets to the handle until it locks
into place. Fill the water container with water and add
mouthwash, if desired.
2. Turn on the irrigator by pressing the on/off switch.
(When doing so, the handle switch should be in the
lower position = water stop).
3. Select the water pressure with the pressure control dial
(1 = gentle, 5 = strong). We recommend that you start
with setting 1, especially if your gums tend to bleed or
if children are using the irrigator.
4. Bend over a washbasin and guide the jet to your teeth
and gums. Slide the handle switch
m up to start the
water stream. Keep your mouth slightly open to allow
the water to run into the washbasin.
You can choose between two different jet functions by
sliding the jet switch
9 down or up (before doing so,
turn off the water stream by sliding the handle switch
m
down):
Rotating str
eam for general cleaning and gum massage
(jet switch in lower position): The rotation of the water
stream and its micro-bubbles is designed for easy
penetration below the gumline.
Mono str
eam: straight water stream for site-specific
cleaning (jet switch in upper position)
3719154_OC17_MN_P4-110 Seite 12 Mittwoch, 28. Februar 2007 10:39 10