Filter
Top Products
7
Measuring
For a reliable blood pressure measurement, make sure
that you hold the appliance at heart level. The position
sensor icon (A) will guide you to hold your arm in the right
position at heart level.
1. Fasten the appliance on the slim side of your bare
forearm.
Make sure that the cuff fits tight.
2. Press the red «I/O» (on/off) button (C).
3. Put the hand with the appliance on the other upper arm
as shown. Slowly move the hand upward along the
upper arm.
Watch the position sensor icon and move your hand
up or down according to the direction of the arrow(s)
shown.
4. The position sensor icon shown on the left and a beep
confirm that you have reached the right measuring
position. The measurement will start automatically.
When the measurement is complete, a beep will sound
again, and the reading is displayed.
Upper (systolic) value
Lower (diastolic) value
Pulse
6063010_BP2550_S4-58 Seite 7 Dienstag, 8. April 2003 2:17 14