Filter
Top Products
Measuring
For a reliable blood pressure measurement, make sure
that you hold the appliance at heart level. The position
sensor icon (A) will guide you to hold your arm in the
right position at heart level.
1. Fasten the appliance on the slim side of your bare
forearm.
Make sure that the cuff fits tight.
2. Press the red «I/O» (on/off) button (C).
3. Put the hand with the appliance on the other upper
arm as shown. Slowly move the hand upward along
the upper arm.
Watch the position sensor icon and move your hand
up or down according to the direction of the arrow(s)
shown.
4. The position sensor icon shown on the left and a beep
confirm that you have reached the right measuring
position. The measurement will start automatically.
2cm
mem
English
"
6063009_QRG_Anhang.fm Seite 1 Freitag, 7. Juni 2002 10:35 10