Filter
Top Products
10
Do not apply too much pressure and always keep your
skin stretched.
Make sure the shaving system is in full contact with the
skin.
When using the shaving system, we recommend using
Gillette shaving foam or gel.
Protection sleeve/holder for the shower
The BodycruZer comes with a protection cover that can
also be used as a holder for the appliance when using it in
a shower.
When used as a protection cover, insert the BodycruZer
with the trimmer inside.
When using it as holder, insert the BodycruZer with the
trimmer outside (see picture 9).
Cleaning and maintenance
After each use, clean the BodycruZer.
Remove the trimming comb and brush it out.
You may also use the brush to clean the trimmer if it has
been used for dry applications only.
If you have used The BodycruZer with shaving gel or foam,
rinse it under hot, running water as shown in picture (f).
Shake well to remove excess water and leave to dry.
Apply a drop of light machine oil onto the trimmer on a
weekly basis.
Replacing the shaving system
The shaving system (3) has to be replaced when the orange
stripe becomes discoloured. For best results use with
Gillette M3 POWER cartridges. All MACH3 cartridges fit the
BodycruZer.
Extend the slider, press the release button (4) to eject the
used shaving system.
Insert the appliance into the refill organizer to collect a new
one (g).
In case the BodycruZer has dropped onto the shaving
system, replace the shaving system for safety reasons.
Environmental notice
This appliance contains rechargeable batteries.
To protect the environment, do not dispose of the
appliance in the household waste at the end of its
useful life. Disposal can take place at a Braun
Service Center or appropriate collection sites.
Subject to change without notice
For electric specifications, see printing on the special cord
set.
5785451_BodyCruzer_NA_S6-.indd 105785451_BodyCruzer_NA_S6-.indd 10 05.12.2007 8:39:00 Uhr05.12.2007 8:39:00 Uhr