Filter
Top Products
9
Press the on/off switch (6) to turn on the BodycruZer.
Stretching your skin, carefully move the trimmer against
the direction of hair growth.
For this function, you can use Gillette shaving foam or
gel.
Using the trimming combs 1a – 1c
For best results use the trimming combs on dry hair only.
Do not use shaving foam or gel for this application.
Whenever hairs build up in front of the comb, remove
them.
Trimming on the skin in sensitive areas (e.g. genital area)
with the «sensitive» attachment 1a
For trimming in sensitive areas and improved skin
care, you should use the «sensitive» attachment (1a)
(picture b). Snap it onto the trimmer (2) as shown until it
clicks into place. Press the on/off switch (6) to turn on.
Gently move the BodycruZer against the direction of hair
growth with the comb tips pointing forward. In sensitive
areas take special care that the skin is always stretched
to avoid injuries.
Trimming the hair length with trimming combs «medium»
and «long»
The trimming combs (1b/1c) allow you to cut the hair to
2 different lengths («medium» = 3 mm or «long» = 5 mm).
Start with the «long» trimming comb (1c) to acquire
practice. Gently move the BodycruZer against the
direction of hair growth with the comb tips pointing
forward (picture c).
Combishave («trim&shave»):
Trimming and shaving in one stroke for a close shave of
long haired sections with the trimmer (2) and shaving
system (3).
The combishave is suitable for large areas like chest and
back.
Press the «lock» button and extend the slider to the
«trim&shave» setting (picture d).
Press the on/off switch (6) to turn on the BodycruZer.
The trimmer first raises all long hairs and cuts them off.
The shaving system (3) follows to smooth away any
stubble.
For best results, always make sure that both, the trimmer
and the shaving system are in contact with the skin.
When using this function, we recommend using Gillette
shaving foam or gel.
For sensitive areas, we recommend starting with the
sensitive attachment (1a) and then finish with the shaving
system (3).
Shave:
For a close shave of stubbled areas with the shaving
system (3)
Pressing the «lock» button, extend the slider (5) as far as
it will go to setting «shave» (picture e).
Place the shaving system (3) on the stretched skin and
gently move it against the direction of hair growth.
•
•
5785451_BodyCruzer_NA_S6-.indd 95785451_BodyCruzer_NA_S6-.indd 9 05.12.2007 8:38:59 Uhr05.12.2007 8:38:59 Uhr