Filter
Top Products
9
Turning off
Press the on/off button to turn the product off. Otherwise
the product will turn off automatically after 2 minutes.
Memory mode
Your blood pressure monitor can store the readings of
100 measurements (BP 3550 model: 80 measurements).
Storing is done automatically after each completed
measurement. The memory is non-volatile. This means
that you will not loose stored data when changing
batteries. The memory cannot be cleared. Once the
memory is full, the oldest values will be overwritten.
Recalling stored readings
To recall stored readings, first turn the product off,
then press the memory button (E). A single push (m
or
n)
will recall the latest reading. The lower display line
successively shows memory index and pulse on the one
hand and date and time of the respective measurement
on the other hand. The memory reading also includes the
feedback from the confirmation system as described
above.
Repeatedly pressing the memory button (E) will call up
one by one all stored readings:
m (–) towards older readings
n (+) towards younger readings
Scrolling
Keep one side of the memory button pressed for scrolling
through the memory.
Press the on/off button (C) to exit the memory mode.
6084403_BP3550/60_S4-76 Seite 9 Montag, 5. Februar 2007 2:30 14