Braun 6084 Blood Pressure Monitor User Manual


 
Measuring
1. Place the monitor housing on the slim side of
your bare forearm with the monitor facing
up. The distance aid helps you to keep the
required 2 cm
distance to your palm line.
2. To close the cuff, hold the appliance against
your body. Then take hold of the cuff
closure, pull out the cuff and insert the cuff
closure in the monitor housing until it locks
into place. Once cuff is closed, do not move
the appliance anymore. If you want to
change the monitor position on your arm,
open and close the cuff once again.
3. Press the red on/off button.
4. Put the hand with the appliance on the other
upper arm as shown. Slowly move the
hand upward along the upper arm. Watch
the positioning system and move your hand
up or down according to the direction of the
arrow shown.
5. The positioning system shown on the left
and a beep confirm that you have reached
the right measuring position. The
measurement will start automatically.
m
em
o
2 cm
2 cm
For a reliable blood pressure measurement, please follow the instructions
below.
6084403_BP3550/60_S4-76 Seite 69 Montag, 5. Februar 2007 2:30 14