Filter
Top Products
11
Trouble-shooting
Error message Situation Solution
Battery is low, but thermometer
will still operate correctly.
Insert new batteries.
Battery is too low to take
correct temperature
measurements.
Insert new batteries.
Do you have any further
questions?
... contact Welch Allyn at
1-800-535-6663
(in Canada at 1-800-561-8797).
Replacing the batteries
The thermometer is supplied with two 1.5 V batteries type AA (LR 6).
For best performance, we recommend Duracell
®
alkaline batteries.
Insert new batteries when the battery symbol appears on the display.
Open the battery compartment. Remove the batteries and replace with
new batteries, making sure the poles are in the right direction.
Slide battery door back until it snaps in place.
To protect the environment, dispose of empty batteries
according to national or local regulations.
Calibration
The thermometer is initially calibrated at the time of manufacture.
If this thermometer is used according to the use instructions, periodic
readjustment is not required. If at any time you question the accuracy of
temperature measurements, please contact Welch Allyn (see page 14).
Manufacturing date is given by the LOT number located in the battery
compartment. The first number after LOT represents the last digit of the
year of manufacture.
The next three digits give the day of the year of manufacture.
An example: LOT 0116 xx xx – this product has been manufactured on
the 116th day of the year 2000.
1
2
6021221_PRO4000_S4-46 Seite 11 Dienstag, 21. März 2006 10:24 10