Filter
Top Products
6 en | Installing the VJR-A3-SP Support Bracket VJR-A3-SP Support Bracket
F.01U.170.693 | 2.0 | 2010.08 Installation Guide Bosch Security Systems, Inc.
3. Tighten the four (4) bracket securing screws located in each corner.
Figure 2.3 Bracket Securing Screws
4. Secure the bracket assembly to an overhead securing point using a user-supplied safety
cable.
Figure 2.4 Safety Cable Fitment
5. Use two (2) pencils (or a pencil and nail) and the template tool to trace a 200 mm
diamter hole with a tolerance of ±2.2 mm (7.8 in. ± 1/8 in.) in the center of the mounting
plate.
6. Drill or cut the hole out of the suspended ceiling tile.
7. Install the unit as instructed in the AutoDome Junior HD User’s Manual.