Filter
Top Products
VJR-A3-SP Support Bracket Installing the VJR-A3-SP Support Bracket | en 5
Bosch Security Systems, Inc. Installation Guide F.01U.170.693 | 2.0 | 2010.08
2 Installing the VJR-A3-SP Support Bracket
To secure the VJR-A3-SP kit to a suspended ceiling:
1. Locate the bracket assembly at the desired location. Loosen the securing screws on the
base bracket assembly (refer to Figure 2.3) enough to retain the suspension bars during
handling, but allowing adjustment during installation.
Figure 2.1 Ceiling Mounting (Top View)
2. Snap the bracket clips over the ceiling rails. Slide the base plate to the desired position
on top of the tile.
Figure 2.2 Bracket Clip Fitting
1 Ceiling Tile
2 Suspension Bars
3 Ceiling Base Bracket
4 Securing Screw
5 Bracket Clip