Filter
Top Products
34
Operation
English
6. Press to highlight Timer Audible Reminder and decide if you
want to activate the sound reminder by pressing / . If you
select On, a double beep sound will be heard at the last 30
seconds of counting down/up, and a triple beep sound will be
generated when the timer is up.
7. To activate the presentation timer, press and press / to
highlight On and press ENTER.
8. A confirmation message displays. Highlight Ye s and press
ENTER on the projector or remote control to confirm. You will
see the message “Timer is On” displaying on the screen. The
timer start counting at the time the timer is on.
To cancel the timer, perform the following steps.
• Using the remote control
Press TIMER ON and press / to highlight Off and press ENTER.
• Using the OSD menu
1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Basic menu is highlighted.
2. Press to highlight Presentation Timer and press ENTER to display the Presentation Timer page.
3. Press and press / to highlight Off and press ENTER. A confirmation message displays.
4. Highlight Ye s and press ENTER to confirm. You will see the message “Timer is Off ” displaying on the
screen.
How to use the TIMER ON key?
It is a multi-functional key.
• If the presentation timer is off, pressing this key displays a
confirmation message. You can decide whether to activate the
timer or not by following the on-screen instruction.
• If the timer is already on, pressing this key displays a
confirmation message. You can decide whether to restart,
continue or turn off the timer by following the on-screen
instruction.
Are you sure to turn on the
presentation timer?
Yes
No
NOTICE