Filter
Top Products
16
Connection
English
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see "Shipping
contents" on page 7). They are commercially available from electronics stores.
Connecting a computer or monitor
Connecting a computer
The projector provides a VGA input socket that allows you to connect it to both IBM® compatibles and
Macintosh® computers. A Mac adapter (an optional accessory) is needed if you are connecting legacy version
Macintosh computers.
To connect the projector to a notebook or desktop computer:
The final connection path should be like that shown in the following diagram:
•With a VGA cable: •With a DVI-D cable:
Your computer must be equipped with a
DVI-D input socket.
1. Take the supplied VGA cable and connect one end
to the D-Sub output socket of the computer.
Connect the other end of the VGA cable to the D-
SUB/COMP. IN signal input socket on the
projector.
1. Take a DVI-D cable and connect one end to the
DVI-D output socket of the computer. Connect
the other end of the cable to the DVI-D signal
input socket on the projector.
2. If you wish to make use of the projector (mixed mono) speakers in your presentations, take a suitable audio
cable and connect one end of the cable to the audio output socket of the computer, and the other end to the
AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See
"Audio Settings" on page 42 for details.
Notebook
or desktop
computer
21
1. VGA cable
1. DVI-D cable
2. Audio cable
Many notebooks do not turn
on their external video ports
when connected to a
projector. Usually a key
combo like FN + F3 or CRT/
LCD key turns the external
display on/off. Locate a
function key labeled CRT/
LCD or a function key with a
monitor symbol on the
notebook. Press FN and the
labeled function key
simultaneously. Refer to
your notebook's
documentation to find your
notebook's key combination.
1