Filter
Top Products
Random Access Adjustment Mode
6-6 5975847 BARCOGRAPHICS 1208S 220197
Port 2 : Video or S-Video
Port 2 can be used as a Video or S-Video input.
Highlight Port 2 by pushing the control stick forward or backward and
press
ENTER
to toggle between VIDEO and S-VIDEO.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
PORT2 : S-VIDEO
LINE DOUBLER : ON
Line Doubler (option)
Line doubling is only possible for Video, S-Video, Component
Video images on standard line frequency and RGB signals on 15
kHz.
To eliminate the video line patterns and to improve the image
stability, the line doubler has to be switched on. The line doubler
is default set in the ON position when starting up for the first time.
The setting of the line doubler will be saved together with the
source number. Each time this source number is selected, the
last saved version will be loaded.
Highlight Line Doubler with the control stick and press
ENTER to
toggle between ON (active) and OFF (non active).
EXIT will return to the random access selection menu.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PORT2 : S-VIDEO
LINE DOUBLER : ON
Color Select
Highlight COLOR SELECT by pushing the control stick forward or
backward and press
ENTER
to display the color select menu.
Select with or
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with or
<ENTER> to accept
<EXIT> to return.
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
ENTER continues to the color select menu
EXIT will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu
ADJUST returns to operational mode
Use the control stick to highlight a color (CRT) or combination of
colors to display the projected image in that specific color.
To select a new color, press
ENTER, the color selection menu
appears again on the screen. To terminate the color select proce-
dure, press
EXIT
.
ENTER continues with the selected color or color combina-
tion.
EXIT returns to the Random access main menu.