Barco R9000896 Wheelchair User Manual


 
Connections
3-6 5975847 BARCOGRAPHICS 1208S 220197
PERIPHERAL EQUIPMENT
Connecting a RCVDS 05 switcher to the
BARCOGRAPHICS 1208s
- Up to 20 inputs with the RCVDS 05 switcher and up to 90 inputs
when 10 RCVDS switchers are linked via the expansion modules.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the
BARCOGRAPHICS 1208s (source selection and analog settings)
- The selected source number will be displayed on a 2 digit display
and the selected input modules will be indicated with a LED on the
rear.
For more information about the use of tje RCVDS, consult the
Owner's Manual of the RCVDS.
Order number : RCVDS05 : R5975765
Connecting a VS05 switcher to the
BARCOGRAPHICS 1208s.
The VS05 can switch up to 5 Composite Video sources, 3 S-Video
Sources and 1 RGB analog or component Video source to the
BARCOGRAPHICS 1208s. In addition, an audio signal associated
with the source, can be switched to an audio amplifier.
Order number : R9827890.
For more information about the use of the VS05, consult the VS05
Owner's Manual, order number : R5975245.
Connecting an IR Remote Receiver to the
BARCOGRAPHICS 1208s
This infra-red receiver unit makes it possible to control the
BARCOGRAPHICS 1208s from another room. There is a communi-
cation line cable between the IR receiver and the projector or the
RCVDS 800. The infrared control information from the Remote
Control Unit is sent to the IR Remote Receiver. The IR Remote
Receiver 800 displays the selected source on a 7-segment display.
Order number : R9827515.