Filter
Top Products
Axis Pivot |14| English
Axis Pivot |15| English
Using Your Shaver
1. Remove the protective plastic headguard.
2. Ensure that the foil screens and inner cutters are not damaged.
Replace damaged parts before using. To obtain replacement parts,
refer to the “Ordering Replacement Parts” section of this manual.
3. To turn the shaver on, depress the lock button and slide the on/off
switch up to the “on” position.
4. Gently stretch the skin of your face with your free hand while mov-
ing the shaver slowly and smoothly against the grain of your beard.
Hold the shaver at a 90° angle to your face while maintaining contact
with the foils.
5. To shave the chin area, gently pull the skin upward and stroke
the shaver in an easy up and down motion. To avoid damaging the
delicate foils, do not apply high pressure.
6. Turn shaver off and replace protective headguard.
To shave hard to reach/longer hairs, sideburns, mustaches
or beards:
The trimmer easily cuts the longer, hard to reach hairs of the face and
neck.
1. Slide the trimmer up into its locked position and stroke gently
against the hairs to be cut.
2. To trim sideburns, hold so that the trimmer lightly touches the skin at
a 90° angle and move downwards. To avoid draining the battery, keep
the trimmer in its off position when not in use.
Cleaning the Head and Cutter Assembly
Regular cleaning is necessary in order to maintain the optimal perfor-
mance and maximum comfort from your shaver. Wipe the shaver’s