Filter
Top Products
Axis Pivot |22| English
Axis Pivot |23| English
the component may jump out.
6. Pull the batteries out from the shaver.
7. Cut the wires that connect the batteries (2 wires for a battery) with
nippers.
WARNING! To avoid the risk of bursting and the subsequent release of
toxic materials, never mutilate or place the batteries in fire. To prevent
accidental burns, avoid short-circuiting the batteries. Dispose of batter-
ies in accordance with local disposal /recycling requirements.
IMPORTANT! For best shaving performance and results, we recom-
mend that you replace your shaver’s foil screens every six months and
inner cutters at least once a year.
To Replace Foil Screens
Skin irritation or a deterioration of shave quality typically indicates that
your foils need to be replaced. Replacement intervals will vary with
individual use and hair types.
1. Depress the hairpocket release
buttons on both sides of the shaver
and gently lift it off. (fig. 7)
2. Position the replacement head
assembly over the cutters. Be careful not to damage the foils. Gently
slide the head assembly down until it seats firmly into place. (fig. 8)
To Replace the Inner Cutters
NOTE: Always replace foil screens when replacing the inner cutters.
1. Remove the foil screen assembly by pressing
the release buttons on both sides of the shaver and
lifting the assembly off. (fig. 7)
2. Remove the inner cutters by grasping and lifting
upwards.(fig. 9)
'JH
'JH
'JH
'JH
'JH
'JH
7
8
'JH
'JH
'JH
9