Filter
Top Products
WARNING: Upon removal, cover the battery pack’s terminals with heavy duty
adhesive tape. Do not attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium batteries must be recycled or
disposed of properly. Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep away from children.
Failure to comply with these warnings could result in fire and/or serious
injury.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS INTENDED FOR COMMERCIAL USE
1. Models BGRC/BGR+ will run on an average of 3800 SPM with
the cord pack attached.
2. Models BGRC/BGR+ can be used with either the cord pack or the
battery.
3. Remove the transformer wall plug and clipper from the carton.
4. With the clipper in the off position, insert the adapter plug into
the bottom of the clipper. Note that the adapter plug is fitted with
a tongue to align properly with the groove in the clipper. Once
the adapter plug and clipper are aligned, press firmly together.
You may hear a click as the adapter plug contacts engage.
5. Plug the transformer wall plug into the AC outlet as identified on
the carton.
6. The clipper is now ready to be used.
See page 6 for clipper use
Tongue
Adapter
Plug
Transformer
Wall Plug
Model BGRC Cord Pack Use
2